How to Connect to QFIELD for QGIS

>How to Connect to QFIELD for QGIS<

It is recommended to use the Android version of QFIELD, as this version supports connecting to an external GNSS receiver via Bluetooth. Since the iOS version does not support connecting to external Bluetooth GNSS receivers, it is not recommended.

Additionally, QFIELD does not support providing NTRIP data to the P-70 Ultra. To access NTRIP services and achieve centimeter-level positioning accuracy, you can use the "Bluetooth GNSS" app. For more information, please refer to>

Using "Android 11" as an Example

Preparation: Pair the "Bluetooth Channel 2" of P-70 Ultra with your Android device. For more details, refer to>

Open "QFIELD".

Long press the icon in the bottom right corner.

Check "Enable Positioning" and "Show Position Information", then tap "Positioning Settings".

Tap "Add".

Select "Bluetooth (NMEA)", choose "P-70 Ultra SPP", then tap "✔".

Once the positioning information appears, the connection is successful, and the Bluetooth Lamp will turn on.