>How to Connect to Android via Bluetooth <

Using "Android 11" as an Example

Connect the P-70 Ultra to a power source.

When connecting to a power bank, activate the low-current mode first to prevent automatic shutdown during use.

The interface may vary slightly across different versions.

Go to "Settings" - "Bluetooth", enable Bluetooth, and tap "Pair new device".

  Selecting the correct Bluetooth channel:
• "P-70 Ultra NTRIP SPP" – This is Bluetooth Channel 1. Choose this option if you need to provide NTRIP data service to the P-70 Ultra.
• "P-70 Ultra SPP" – This is Bluetooth Channel 2. Choose this option if you already have another way to provide NTRIP service and only need to receive position data.

  Tap the desired channel and click "Pair".

  Pairing is complete.

You can pair both Bluetooth channels with the system simultaneously, allowing different apps to use different Bluetooth channels at the same time.