Quick Start

Firmware

English V2.0

German V2.0

Current version: V2.2  Updated: Aug 22, 2022.

 

How to configure P-10 Pro

P-10 Pro has been equipped with the factory default configuration, you can just turn it on to record.
Click to view the details of the factory default configuration>

If you need to change the configuration, please follow the steps below:

The factory default configuration of P-10 Pro:

[SETTINGS]
TimeZone=+00:00
SpeedAlert=OFF
AutoPowerOn=OFF
Beeper=ON
FunctionButton=Pause
[RECORD]
Format=CSV
LogMode=1Hz
SpeedMask=1
SpyModeTimer=5
OneTrackPerDay=OFF
[UNIT]
Speed=km/h

Step 1

Step 2

Step 3

Download the default configuration file.

On the icon below, right-click and select "Save as" to save the file "CONFIG.TXT".

Turn off P-10 Pro. Connect P-10 Pro to the computer with the cable, copy the configuration file under the root directory of the MicroSD card, and eject the device.

In the power-off state, press the "Power Button" and the "POI Button “simultaneously until you hear 3 short beeps, then the 3 lamps will flash three times at the same time, and finally you hear one long beep, indicating the configuration is successfully completed.

Change the parameters as needed. Please refer to the Quick Start for details.

How to place it properly

The track accuracy of the P-10 Pro is significantly affected by the placement. According to the scene, we recommend the following placement:

Driving. Place it under the windshield of the vehicle and face up.
Recommendation: ★★★

Walking. Hand held, face up.
Recommendation: ★★★

Carrying. Place it in the bag, face outwards.
Recommendation: ★

   

Software

Contact Us

columbusgps@hotmail.com
 

 
 
 

Columbus  |  Product  |  Support  |  Service  |  Contact Us  |  Market

© 2003-2021 Victory Co., Ltd.