Description of 5Hz log mode of V1.3 firmware

For the first time, we have added a 5Hz log mode to the P-10 Pro in V1.3 firmware, that is, 5 track points are recorded every 1 second, with an interval of 200 milliseconds between each track point.

Please note the following:
1. The 5Hz log mode of P-10 Pro is only suitable for scenes with high-speed movement (average speed higher than 20km/h) and open sky. Not suitable for low-speed moving scenes.
2. Due to the GNSS positioning principle, the positioning accuracy in the 5Hz log mode will be relatively reduced, and the static drift will be relatively increased. At the same time, a relatively smooth high-speed motion track can be obtained.

P-10 Pro出厂默认配置

时区:+00:00
超速报警:关闭
自动开关机:关闭
提示音:开启
功能键:暂停
轨迹格式:CSV
记录方式:1Hz
触发速度:?
潜伏模式时间间隔:15分钟?
一天一条轨迹:关闭
单位:km/h

How to configure

The configuration file CONFIG.TXT is set according to the following parameters:

LogMode=5Hz

At the same time, it is recommended to configure the SpeedMask to 3km:

SpeedMask=3

Save the CONFIG.TXT file in the root directory of the P-10 Pro MicroSD card, and then configure the device.