Configure Your P-1 in 3 Steps!

Step1

Step2

Step3

Click to download the configuration file.

Import the configuration file (CONFIG.TXT) directly into P-1 under the root directory.

Turn off P-1. Connect P-1 to the computer with the cable, copy the configuration
file under the root directory of the MicroSD card, and eject the device.

In the power-off state, press the "Power Button" and the "POI Button"simultaneously until you hear 3 short beeps, then the 3 lamps will flash three times at the same time, and finally you hear one long beep, indicating the configuration is successfully completed.

Here is the default configuration file.
For other usage scenarios, please download the configuration file below.
You can change the P-1 configuration parameters as needed, please refer to the Quick Start for details.