To keep your EX-1 in optimal working condition, please
ensure that the firmware is always updated to the latest
version.
You can visit the following link to obtain the latest
firmware version. Click here to learn more>
While the EX-1 is powered off, connect it to your computer.
Copy the firmware file ¡°EX1.BIN¡± to the root directory of
the microSD card, then safely eject the device.
Do not change
the file name.
Press and hold the power button to turn on the device. You
will hear three beeps, and the four lamps will flash green
in sequence. Once the firmware upgrade is complete, you will
hear a long beep and the device will power off.
This indicates that the firmware upgrade is successful.
While the EX-1 is powered off, connect it to your computer.
Copy the firmware file ¡°EX1.BIN¡± to the root directory of
the microSD card, then safely eject the device.
Do not change
the file name.
Press and hold the power button to turn on the device. You
will hear three beeps, and the four lamps will flash green
in sequence. Once the firmware upgrade is complete, you will
hear a long beep and the device will power off.